Kia 8510126000 Rear View Inside Mirror Assembly

You can Select Your Vehicle to check if 8510126000 fits your vehicle.

To remove the outside mirror, you, however, have to unclip the interior sail panel from the corner of the door gently. If the vehicle has power mirrors, pull out or remove the door trim panel, use a needly screwdriver to detach the electrical connectors and unhook the harness retainer of the mirror. Subsequently, disconnect the mirror mounting bolt and take out the mirror, and vice versa for assembling the parts. As for the inside mirror, if configured, to remove it, the electric connector must be disconnected at the back side of the mirror, then the set screw located at the back of the mirror is slided up using a Phillips head screwdriver and after that the inside mirror can be released by shifting it up off the button on the windshield. If the mount plate will no longer stick to the windshield: adhesive kits are available at auto parts stores for this purpose and the usage is explained in manuals. Removing entails holing of ways while installation is the reverse of removal.

Inspect the circuit between the mirror and control switch for any opens or shorts.

If there is no set screw, reinstall the spring if it was removed, insert the mirror stalk's lug into the mount, and push down until secured.

To replace the outside mirrors, pry off the mirror trim cover and disconnect the electrical connector if equipped. Remove the three mirror retaining fasteners and detach the mirror from the vehicle, carefully peeling off the foam insulation before removing the mounting fasteners. For installation, reverse the removal process.

When adjusting the mirror, the power mirror adjustment switch sends voltage to the left or right side mirror.