Kia 2510037201 Pump Assembly-Coolant

You can Select Your Vehicle to check if 2510037201 fits your vehicle.

Install the remaining parts in the reverse order of removal. Refill the cooling system, then run the engine and check for leaks and proper operation.

If you suspect water pump leakage, remove the timing belt cover and use a flashlight to find the hole in the water pump by looking through the space behind the pulley, just below the water pump shaft.

Using a flashlight, look for traces of coolant residue or dried coolant tracks around the weep hole(s). If the shaft bearings fail, there may be a howling sound near the water pump while it's running, and a quick performance check can be done by making sure the coolant level is full, starting the vehicle and warming it up fully, turning the heater on in the passenger compartment, and checking for little or no heat output. A water pump may still be due for replacement even if it's not leaking or making any noise, and the only sure way to tell is to remove the pump and examine it closely for a loose or corroded impeller, a leaking shaft seal, or a worn shaft bearing.

Check the impeller on the backside for evidence of corrosion or missing fins.