Kia 311114D500 Fuel Pump Assembly

You can Select Your Vehicle to check if 311114D500 fits your vehicle.

Relieve the fuel system pressure and remove the fuel filler cap. Disconnect the cable from the negative battery terminal. Remove the left-side second row rear seat, then pull the carpet back. On 2005 and earlier models, it isn't necessary to remove the seat. Remove the fuel pump/Fuel Level Sensor floor service hole cover by taking out the screws and lifting up the fuel pump access cover. Disconnect the fuel pump electrical connectors and the fuel lines from the top of the fuel pump unit. Remove the sound insulator, if equipped, and mark the fuel pump orientation for reference when installing. On 2005 and earlier models, remove the fuel pump mounting screws. For 2006 and later models, use special service tool 09310-2B200 (or equivalent) to rotate the lock ring counterclockwise and remove it; alternatively, a punch can be used to drive the lock ring in a counterclockwise direction. Carefully lift the fuel pump/Fuel Level Sensor assembly from the fuel tank. Installation is the reverse of removal.

No, at the time of writing, individual components of the fuel pump module were not available separately.