How do you install a hood latch and release cable on Kia Sorento?

To fit the latch, draw a line around it and then undo the bolts holding the hood latch in place to the radiator support and take out the latch. Next, remove the hood release cable by pulling the latch and the cable end, involving in removal of the cable retainer. To install it, reverse all the steps explained above, but in this case, the latch should be set in such a way that the handles come into contact with the hood and slightly snap it when closed, and the bumpers should be slightly squeezed. In passenger compartment, turn the hood release handle anti-clockwise to around 90 degrees or 180 degrees, pull the aluminum housing covering at the end of the cable towards the rear and remove it from the hood release lever handle. Take a thin wire or string and fix it to the end of the cable, after this remove the hood release cable from the latch. Take out the LH inner plastic fender well and release all the cable retainers on the radiator support and outer fender well to expose the hood release cable. Snake the cable towards the wheel well exposing the wire or string and then disconnect it from the old cable and secure it on the new one. With the new cable well placed, draw the wire or string back through the body until the other end of the new cable is inserted into the inside handle. Last, decide the new cable into the hood release lever so that to the cable housing to sit into the groove in the handle bracket; and lastly, reverse the procedures given under the removals.

Genuine Kia Sorento Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Hood Cables found

View related parts
Kia Sorento Cable Assembly-Hood Latch
Part Number: 811901U100
$18.56 MSRP: $26.10
You Save: $7.54 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2009-2014 Kia Sorento | 2.4L - Theta 2, 3.3L - Lambda 2, 3.5L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Cable Assembly-Hood Latch
Part Number: 81190C6100
$26.11 MSRP: $36.72
You Save: $10.61 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2020 Kia Sorento | 2.0L - R, 2.0L - Theta 2, 2.4L - Theta 2, 3.3L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Cable Assembly-Hood Latch
Part Number: 811903E001
$19.51 MSRP: $27.43
You Save: $7.92 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2008 Kia Sorento | High Grade, Middle Grade | 3.3L - Lambda, 3.5L, 3.8L, 3.8L - Lambda | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sorento Cable Assembly-Hood Latch
Part Number: 811901U000
$19.24 MSRP: $27.07
You Save: $7.83 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2009-2012 Kia Sorento | 2.4L - Theta 2, 3.5L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Cable Assembly-Hood Latch
Part Number: 81190C6000
$26.11 MSRP: $36.72
You Save: $10.61 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2020 Kia Sorento | 2.0L - R, 2.0L - Theta 2, 2.4L - Theta 2, 3.3L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Cable Assembly-Hood Latch
Part Number: 811902P100
$15.93 MSRP: $21.58
You Save: $5.65 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2009-2012 Kia Sorento | 2.4L - Theta 2, 3.5L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Cable Assembly-Hood
Part Number: 811901U050
$32.96 MSRP: $46.75
You Save: $13.79 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2013-2014 Kia Sorento | 2.4L - Theta 2, 3.3L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Pad U
Part Number: 81190S9100
$43.56 MSRP: $61.78
You Save: $18.22 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2021-2023 Kia Sorento | 2.5L-THETA-III | Wagon - 5Door 6P, Wagon - 5Door 7P
View related parts
Kia Sorento Cable Assembly-Hood
Part Number: 811901U150
$19.18 MSRP: $25.98
You Save: $6.80 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2013-2014 Kia Sorento | 2.4L - Theta 2, 3.3L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Cable Assembly-Hood Latch
Part Number: 811903E000
$19.22 MSRP: $27.04
You Save: $7.82 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Hood Latch Release; Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2006 Kia Sorento | High Grade, Middle Grade | 3.5L | 5 Door Wagon
View related parts
Kia Sorento Cable Assembly-Hood LATC
Part Number: 81190P2100
$13.39 MSRP: $18.83
You Save: $5.44 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2021-2023 Kia Sorento | 1.6L-Gamma-II | Wagon - 5Door 6P
View related parts
Kia Sorento Cable Assembly-Hood LATC
Part Number: 81190R5000
$33.84 MSRP: $48.00
You Save: $14.16 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2021-2023 Kia Sorento | 2.5L-THETA-III | Wagon - 5Door 6P, Wagon - 5Door 7P
View related parts
Kia Sorento Cable Assembly-Hood LATC
Part Number: 81190P2000
$24.20 MSRP: $34.03
You Save: $9.83 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Release Cable
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2021-2023 Kia Sorento | 1.6L-Gamma-II | Wagon - 5Door 6P

Kia Sorento Hood Cable

If you're in search of top-notch, reasonably priced OEM Kia Sorento Hood Cable, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Sorento Hood Cable, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Sorento Hood Cable Parts Questions & Experts Answers

Cable Assembly-Hood Latch
811903E001
Q: How do you install a hood latch and release cable on Kia Sorento?
A: To fit the latch, draw a line around it and then undo the bolts holding the hood latch in place to the radiator support and take out the latch. Next, remove the hood release cable by pulling the latch and the cable end, involving in removal of the cable retainer. To install it, reverse all the steps explained above, but in this case, the latch should be set in such a way that the handles come into contact with the hood and slightly snap it when closed, and the Bumpers should be slightly squeezed. In passenger compartment, turn the hood release handle anti-clockwise to around 90 degrees or 180 degrees, pull the aluminum housing covering at the end of the cable towards the rear and remove it from the hood release lever handle. Take a thin wire or string and fix it to the end of the cable, after this remove the hood release cable from the latch. Take out the LH inner plastic fender well and release all the cable retainers on the radiator support and outer fender well to expose the hood release cable. Snake the cable towards the wheel well exposing the wire or string and then disconnect it from the old cable and secure it on the new one. With the new cable well placed, draw the wire or string back through the body until the other end of the new cable is inserted into the inside handle. Last, decide the new cable into the hood release lever so that to the cable housing to sit into the groove in the handle bracket; and lastly, reverse the procedures given under the removals.