How do you disconnect and remove the Canister Purge Valve,Vapor Canister and Vapor Pressure Sensor from a Kia Sorento?

Disconnect the cable from the negative terminal of the battery. Remove the engine cover, if applicable, then disconnect the electrical connector and vacuum hoses from the purge valve. Remove the purge valve mounting fasteners and take out the purge valve, with installation being the reverse of removal. Raise the rear of the vehicle and support it securely on jackstands, then remove the protective cover from the EVAP canister assembly, if equipped. The two-way valve is located in the line between the fuel tank and the canister; disconnect the EVAP hoses from it, ensuring correct installation direction indicated by the arrow on the valve. The EVAP canister is mounted to the frame rail near the fuel tank; disconnect the hoses and wiring from the canister closed valve, then remove the EVAP canister mounting bracket bolts to take out the canister and bracket as a single assembly, with installation being the reverse of removal. The vapor pressure sensor is mounted to the rear end of the fuel tank in the line connecting the fuel tank and the canister; disconnect the wiring harness and fuel hoses, then remove the sensor along with its mounting bracket, which can be detached from the sensor after it is out of the vehicle, with installation being the reverse of removal. Finally, disconnect the wiring connector from the canister closed valve and remove the valve from the canister, with installation being the reverse of removal.

Genuine Kia Sorento Vapor Pressure Sensor

Fuel Vapor Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Vapor Pressure Sensors found

View related parts
Kia Sorento Sensor-Fuel Tank Pressure
Part Number: 314352J000
$64.90 MSRP: $92.05
You Save: $27.15 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pressure Sensor, Sensor, Tank Pressure Sensor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2023 Kia Sorento | 2.0L - R, 2.0L - Theta 2, 2.4L - Theta 2, 2.5L-THETA-III, 3.3L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 6P, Wagon - 5Door 7P
View related parts
Kia Sorento Sensor-Fuel Tank Pressure
Part Number: 31435FD500
$62.04 MSRP: $88.00
You Save: $25.96 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pressure Sensor, Sensor, Tank Pressure Sensor
- Replaces: 0K32A18211A
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2008 Kia Sorento | High Grade, Middle Grade | 3.3L - Lambda, 3.5L, 3.8L, 3.8L - Lambda | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sorento Sensor-Fuel Tank Pressure
Part Number: 314353K600
$111.01 MSRP: $157.47
You Save: $46.46 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pressure Sensor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2009-2014 Kia Sorento | 2.4L - Theta 2, 3.3L - Lambda 2, 3.5L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Sensor-Tank Pressure
Part Number: 0K32A18211A
$64.42 MSRP: $88.00
You Save: $23.58 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 31435FD500
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2006 Kia Sorento | High Grade, Middle Grade | 3.5L | 5 Door Wagon
View related parts
Kia Sorento Hose-Vapor
Part Number: 314353T000
$87.97 MSRP: $124.78
You Save: $36.81 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-Fuel Pressure
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2020 Kia Sorento | 2.0L - R, 2.0L - Theta 2, 2.4L - Theta 2, 3.3L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Sensor-Fuel Tank Pre
Part Number: 31435P4800
$53.46 MSRP: $75.85
You Save: $22.39 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2021-2023 Kia Sorento | 1.6L-Gamma-II | Wagon - 5Door 6P
View related parts
Kia Sorento Sensor-Fuel Pressure
Part Number: 31435L1100
$115.42 MSRP: $163.72
You Save: $48.30 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pressure Sensor, Tank Pressure Sensor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2021-2023 Kia Sorento | 1.6L-Gamma-II | Wagon - 5Door 6P

Kia Sorento Vapor Pressure Sensor

If you're in search of top-notch, reasonably priced OEM Kia Sorento Vapor Pressure Sensor, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Sorento Vapor Pressure Sensor, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Sorento Vapor Pressure Sensor Parts Questions & Experts Answers

Sensor-Fuel Tank Pressure
314353K600
Q: How do you disconnect and remove the Canister Purge Valve,Vapor Canister and Vapor Pressure Sensor from a Kia Sorento?
A: Disconnect the cable from the negative terminal of the battery. Remove the engine cover, if applicable, then disconnect the electrical connector and vacuum hoses from the purge valve. Remove the purge valve mounting fasteners and take out the purge valve, with installation being the reverse of removal. Raise the rear of the vehicle and support it securely on jackstands, then remove the protective cover from the EVAP canister assembly, if equipped. The two-way valve is located in the line between the fuel tank and the canister; disconnect the EVAP hoses from it, ensuring correct installation direction indicated by the arrow on the valve. The EVAP canister is mounted to the frame rail near the fuel tank; disconnect the hoses and wiring from the canister closed valve, then remove the EVAP canister mounting bracket bolts to take out the canister and bracket as a single assembly, with installation being the reverse of removal. The vapor pressure sensor is mounted to the rear end of the fuel tank in the line connecting the fuel tank and the canister; disconnect the wiring harness and fuel hoses, then remove the sensor along with its mounting bracket, which can be detached from the sensor after it is out of the vehicle, with installation being the reverse of removal. Finally, disconnect the wiring connector from the canister closed valve and remove the valve from the canister, with installation being the reverse of removal.