What are the steps involved in removing and installing the rear axleshaft,Wheel Bearing and Wheel Seal on Kia Sorento?

Pull the parking brake lever, lift the rear of the car, and secure it on jackstands; also, chock the front wheels before detaching the wheels and tires. Third, the brake disc also has to be unbolted and dismantled as well as the ABS wheel speed sensor, while the parking brake cables should be disconnected from levers of the brake backing plate and the parking brake shoes should be taken out. Remove the four bearing retainer nuts and gently pulling the axleshaft out from the rear axle housing with the assisting backing plate in a way that will not damage the axleshaft seal. The next step provided for removal of the axleshaft inner oil seal and if further disassembly of the axleshaft assembly deeper work and the tools will be needed; it is recommended to take the assembly to the automotive machine if some of the components will be required to be replaced. Force a new axleshaft inner seal onto the end of the axle tube by hammering with a seal installer or by using a big socket.Put clean oil or multi purpose grease on the lip of the seal while installing it. Check the condition of the axleshaft is that it does not have any sharp edges like burr or metal splinters, and then smoothing out any rough edges that may hurt the seal during fitting. After the clean up of the axleshaft, it should lightly be oiled before being placed in its place in the axle housing and the splined inner end must not damage the lip of the new seal. Last is installation: and it is just the reverse of removal; the four retainers nuts are to be tightened to the required torque.

Genuine Kia Sorento Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Wheel Bearings found

View related parts
Kia Sorento Wheel Hub Assembly
Part Number: 517503J000
$151.03 MSRP: $216.07
You Save: $65.04 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly; Front Hub, Hub
- Replaced by: 517503J000DS
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2009-2014 Kia Sorento | 2.4L - Theta 2, 3.3L - Lambda 2, 3.5L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Hub Assembly
Part Number: 51750S1000
$161.36 MSRP: $230.85
You Save: $69.49 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad U; Front Hub & Bearing, Rear Hub & Bearing
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2021-2023 Kia Sorento | 1.6L-Gamma-II, 2.5L-THETA-III | Wagon - 5Door 6P, Wagon - 5Door 7P
View related parts
Kia Sorento Front Wheel Hub Assembly
Part Number: 51750C5000
$153.31 MSRP: $219.34
You Save: $66.03 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Front Wheel
- Position: Front
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2020 Kia Sorento | 2.0L - R, 2.0L - Theta 2, 2.4L - Theta 2, 3.3L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Front Wheel Hub Assembly
Part Number: 513003E200
$121.03 MSRP: $173.15
You Save: $52.12 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Front Wheel; Front Hub, Hub & Bearing
- Position: Front
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2008 Kia Sorento | High Grade, Middle Grade | 3.3L - Lambda, 3.5L, 3.8L, 3.8L - Lambda | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sorento Rear Wheel Hub Assembly
Part Number: 527502B100
$210.67 MSRP: $301.38
You Save: $90.71 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Rear Wheel; Hub, Hub Assembly
- Position: Rear
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2009-2014 Kia Sorento | 2.4L - Theta 2, 3.3L - Lambda 2, 3.5L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Front Wheel Bearing
Part Number: 503103E101
$117.78 MSRP: $160.90
You Save: $43.12 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing-Front Wheel
- Position: Front
- Replaced by: 503103E102
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2008 Kia Sorento | High Grade, Middle Grade | 3.3L - Lambda, 3.5L, 3.8L, 3.8L - Lambda | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sorento Rear Wheel Hub Assembly
Part Number: 52750C5000
$253.57 MSRP: $364.95
You Save: $111.38 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Rear Wheel; Hub Assembly, Rear Hub & Bearing
- Position: Rear
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2020 Kia Sorento | 2.0L - R, 2.0L - Theta 2, 2.4L - Theta 2, 3.3L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Rear Wheel Bearing
Part Number: 523713E000
$124.71 MSRP: $178.42
You Save: $53.71 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing-Rear Wheel; Axle Bearings, Wheel Bearing
- Position: Rear
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2008 Kia Sorento | High Grade, Middle Grade | 3.3L - Lambda, 3.5L, 3.8L, 3.8L - Lambda | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sorento Wheel Hub Assembly
Part Number: 517502B010
$155.57 MSRP: $216.07
You Save: $60.50 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly
- Replaced by: 517503J000DS
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2009-2014 Kia Sorento | 2.4L - Theta 2, 3.3L - Lambda 2, 3.5L - Lambda 2 | Wagon - 5Door 5P, Wagon - 5Door 7P
View related parts
Kia Sorento Front Wheel Hub Assembly
Part Number: 513003E100
$104.52 MSRP: $148.25
You Save: $43.73 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly-Front Wheel; Front Hub, Hub & Bearing
- Position: Front
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2006 Kia Sorento | High Grade, Middle Grade | 3.5L | 5 Door Wagon
View related parts
Kia Sorento Bearing-Rear Wheel
Part Number: 52720P2000
$221.98 MSRP: $317.57
You Save: $95.59 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Assembly, Rear Hub & Bearing
- Position: Rear
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2021-2023 Kia Sorento | 1.6L-Gamma-II, 2.5L-THETA-III | Wagon - 5Door 6P, Wagon - 5Door 7P
View related parts
Kia Sorento Front Wheel Bearing
Part Number: 503103E102
$113.43 MSRP: $160.90
You Save: $47.47 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing-Front Wheel; Bearing, Wheel Bearing
- Position: Front
- Replaces: 503103E201, 503103E200, 503103E101
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2008 Kia Sorento | High Grade, Middle Grade | 3.3L - Lambda, 3.5L, 3.8L, 3.8L - Lambda | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sorento Bearing-Rear Wheel
Part Number: 52720P2100
$223.63 MSRP: $319.93
You Save: $96.30 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Rear
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2021-2023 Kia Sorento | 1.6L-Gamma-II | Wagon - 5Door 6P
View related parts
Kia Sorento Front Wheel Bearing
Part Number: 503103E201
$117.78 MSRP: $160.90
You Save: $43.12 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing-Front Wheel
- Position: Front
- Replaced by: 503103E102
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2006 Kia Sorento | High Grade, Middle Grade | 3.5L | 5 Door Wagon
View related parts
Kia Sorento Front Wheel Bearing
Part Number: 503103E200
$117.78 MSRP: $160.90
You Save: $43.12 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing-Front Wheel
- Position: Front
- Replaced by: 503103E102
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2006 Kia Sorento | High Grade, Middle Grade | 3.5L | 5 Door Wagon

Kia Sorento Wheel Bearing

If you're in search of top-notch, reasonably priced OEM Kia Sorento Wheel Bearing, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Sorento Wheel Bearing, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Sorento Wheel Bearing Parts Questions & Experts Answers

Rear Wheel Bearing
523713E000
Q: What are the steps involved in removing and installing the rear axleshaft,Wheel Bearing and Wheel Seal on Kia Sorento?
A: Pull the parking brake lever, lift the rear of the car, and secure it on jackstands; also, chock the front wheels before detaching the wheels and tires. Third, the brake disc also has to be unbolted and dismantled as well as the ABS wheel speed sensor, while the parking brake cables should be disconnected from levers of the brake backing plate and the parking brake shoes should be taken out. Remove the four bearing retainer nuts and gently pulling the axleshaft out from the rear axle housing with the assisting backing plate in a way that will not damage the axleshaft seal. The next step provided for removal of the axleshaft inner oil seal and if further disassembly of the axleshaft assembly deeper work and the tools will be needed; it is recommended to take the assembly to the automotive machine if some of the components will be required to be replaced. Force a new axleshaft inner seal onto the end of the axle tube by hammering with a seal installer or by using a big socket.Put clean oil or multi purpose grease on the lip of the seal while installing it. Check the condition of the axleshaft is that it does not have any sharp edges like burr or metal splinters, and then smoothing out any rough edges that may hurt the seal during fitting. After the clean up of the axleshaft, it should lightly be oiled before being placed in its place in the axle housing and the splined inner end must not damage the lip of the new seal. Last is installation: and it is just the reverse of removal; the four retainers nuts are to be tightened to the required torque.