How do you disconnect and remove the power steering pump from a Kia Spectra?

Disconnect the cable from the negative battery terminal and place a drain pan under the vehicle to catch any fluid spills when the hoses are disconnected. For four-cylinder models, clamp the feed hose shut, then disconnect it, unscrew the banjo fitting, and disconnect the pressure line from the pump. Cap or plug the hoses and lines to prevent contamination or leakage while they are disconnected. Loosen the mounting and adjusting fasteners to remove the drivebelt, then remove the fasteners to detach the pump. For V6 models, disconnect the Power Steering Pressure switch from the power steering pump, remove the banjo bolt, and disconnect the power steering high-pressure line from the pump. Loosen the hose clamp and disconnect the suction hose from the pump, then remove the power steering pump support bracket bolts and the support bracket. Remove the serpentine drivebelt, and working through the holes in the pump pulley, remove the two power steering pump mounting bolts and the pump. Installation is the reverse of removal, ensuring to tighten the pump mounting fasteners to the specified torque, use new sealing washers on the high-pressure line fitting, install and adjust the drivebelt as outlined, fill the power steering fluid reservoir with the recommended fluid, and bleed the power steering hydraulic system.

Genuine Kia Spectra Power Steering Pump

Power Steering Pump Unit

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Power Steering Pumps found

View related parts
Kia Spectra Pump Assembly-Power STEE
Part Number: 571002F151
$347.67 MSRP: $500.38
You Save: $152.71 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Power Steering Oil; Power Steering Pump
- Replaces: 571002F150
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2009 Kia Spectra | High Grade, Middle Grade | 2.0L, 2.0L - Beta | 4 Door Sedan, 5 Door Sedan, Sedan - 4Door 5P
View related parts
Kia Spectra Pump Assembly-Power Steering
Part Number: 1K2NB32600
$345.76 MSRP: $497.64
You Save: $151.88 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Oil; Power Steering Pump
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2004 Kia Spectra | Low Grade, Middle Grade | 1.8L | 4 Door Sedan, 5 Door Sedan
View related parts
Kia Spectra Pump Assembly-Power STEE
Part Number: 571002F150
$347.67 MSRP: $500.38
You Save: $152.71 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Power Steering Oil
- Replaced by: 571002F151
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2003-2006 Kia Spectra | High Grade, Middle Grade | 2.0L | 4 Door Sedan
View related parts
Kia Spectra Pump Assembly-Power Steering Oil
Part Number: 0K2AA32600D
$331.85 MSRP: $477.62
You Save: $145.77 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pump Assembly-Oil; Power Steering Pump
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2004 Kia Spectra | Low Grade, Middle Grade | 1.8L | 5 Door Sedan

Kia Spectra Power Steering Pump

The Kia Spectra Power Steering Pump is another critical part that plays a huge role in making the vehicle as easy to manage as it is by providing hydraulic steerage from pumped engine energy. Kia Spectra Power Steering Pump is one of the prime in the market since it promises performance, dependability and reliability in terms of maintaining adequate hydraulic pressure for vehicle control and smooth use. This pump is suitable for different years of Kia Spectra produced between the years 2000 and 2009, through this the maximum number of drivers may benefit from the product. Through decreasing the amount of work that needs to be done to rotate the steering wheel, another system which is the Kia Spectra Power Steering Pump aids in handling and is a critical factor towards promoting safety on the road. The pump design usually contains a fluid reservoir either on the same component or a disparate one and is guided by the engine crankshaft with the help of a V-belt drive or a serpentine belt drive. This feature helps to guarantee that the power steering system is running in a proper way, and the automobile ride will be comfortable. Also, the product offered to the Kia Spectra auto market enables the power steering pump to possess a high-strength outlook while providing efficiency in its performance based on different driving styles. In conclusion, for any driver who wants a new pump that is reliable and efficient and that offers safety assurance the Kia Spectra Power Steering Pump is still among the prime.

If you're in search of top-notch, reasonably priced OEM Kia Spectra Power Steering Pump, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Spectra Power Steering Pump, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Spectra Power Steering Pump Parts Questions & Experts Answers

Pump Assembly-Power STEE
571002F151
Q: How do you disconnect and remove the power steering pump from a Kia Spectra?
A: Disconnect the cable from the negative battery terminal and place a drain pan under the vehicle to catch any fluid spills when the hoses are disconnected. For four-cylinder models, clamp the feed hose shut, then disconnect it, unscrew the banjo fitting, and disconnect the pressure line from the pump. Cap or plug the hoses and lines to prevent contamination or leakage while they are disconnected. Loosen the mounting and adjusting fasteners to remove the drivebelt, then remove the fasteners to detach the pump. For V6 models, disconnect the Power Steering Pressure switch from the power steering pump, remove the banjo bolt, and disconnect the power steering high-pressure line from the pump. Loosen the hose clamp and disconnect the suction hose from the pump, then remove the power steering pump support bracket bolts and the support bracket. Remove the serpentine drivebelt, and working through the holes in the pump pulley, remove the two power steering pump mounting bolts and the pump. Installation is the reverse of removal, ensuring to tighten the pump mounting fasteners to the specified torque, use new sealing washers on the high-pressure line fitting, install and adjust the drivebelt as outlined, fill the power steering fluid reservoir with the recommended fluid, and bleed the power steering hydraulic system.