×
- Live Chat
- 1-888-958-2959
My Garage
My Account
Cart
Genuine Kia Spectra Trunk Latch
Rear Trunk Latch- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
10 Trunk Latches found
Kia Spectra Tail Gate Latch Assembly
Part Number: 812302F220$103.18 MSRP: $146.35You Save: $43.17 (30%)Ships in 1-3 Business Days
Kia Spectra Trunk Lid Lock Assembly
Part Number: 812502FA00$34.47 MSRP: $48.90You Save: $14.43 (30%)Ships in 1-3 Business Days
Kia Spectra Trunk Lid Latch Assembly
Part Number: 812302F510$98.74 MSRP: $140.05You Save: $41.31 (30%)Ships in 1-3 Business Days
Kia Spectra Trunk Latch
If you're in search of top-notch, reasonably priced OEM Kia Spectra Trunk Latch, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Spectra Trunk Latch, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.
Kia Spectra Trunk Latch Parts Questions & Experts Answers
- Q: How do you replace the trunk lid latch and Trunk Lock Cylinder on Kia Spectra?A: To replace the trunk lid latch, open the trunk and mark a line around the latch assembly for reference. Look upward through the trunk lid access hole to detach the rod from the lock cylinder by removing the rod retaining clip, then separate the rod. Remove the bolts that hold the trunk lid latch in place, and installation follows the reverse order of removal. For the trunk lock cylinder, open the trunk and again look upward through the access hole to detach the rod from the lock cylinder, then remove the mounting bolt or clip to take out the lock cylinder, with installation reversing the removal steps. For Sportage models, start by removing the rear hatch trim panel screws and plastic fasteners, then carefully pry off the trim panel. To access the rear hatch latch, disconnect the electrical connector, the outside handle rod, and the actuator rod, then remove the latch mounting bolts and the latch itself, with installation reversing the removal process. For the rear hatch glass latch, disconnect the hatch glass latch rod, loosen the latch mounting bolts, disconnect the electrical connector, and remove the latch, again reversing the steps for installation. To remove the rear hatch outside handle, disconnect the outside handle rod and the latch rod, then take off the mounting nuts and remove the handle, with installation following the reverse order. For the actuator, disconnect the electrical connector, the outside handle rod, and the glass latch rod, then remove the mounting nuts and bolt, reposition the actuator to access and disconnect the actuator rod and key lock cylinder, and finally remove the actuator, with installation reversing the removal steps.
