How do you properly remove and install a strut assembly in a Kia Sportage?

Placed the car on jackstands and loosen the wheel lug nuts as well as the front part of the car. Pull the parking brake and place chocks at the rear wheels to avoid the car moving off the jack stands and return the wheels. Remove the brake hose from the strut's brake hose channel and in the case of the ABS equipped vehicle, get rid of the ABS harness from its holder. On 2002 and later models you will need to remove the link from the stabilizer bar if it is connected. Take off all the strut to knuckle nuts and bolts, if they are very tight, use hammer and punch to tighten the nuts. Isolate the strut from the steering knuckle as it may drop down ward and hit the inner CV joint or the brake line as it comes out. Label the position of the strut mount to the strut tower since wheel alignment will be affected if the strut mount is not placed back to its correct position. With support from another person because of the strut's size and the simplicity of maneuvering, undo the mounting nuts, and carefully retreat it out of the fenderwell. For the strut body examine it for signs of leaks, dents, cracks or contaminants and examine coils spring for damages on the surface of the coating or if there are signs of chapping at the spring seat available. If the above problems are deemed as present, then go ahead to the process of dismantling the strut. For installation, align the strut assembly with the fenderwell, thread the strut mount stud to the shock tower holes and fasten the nuts tightly up to the required torque of the car. Once more, help is advised because of the strut's mass is again quite large to carry by hand. Position the steering knuckle into the strut flange, put the bolts in, then tighten the nuts to the manufactures recommended torque. Plug the brake hose and ABS harness if it is necessary; put the wheel on and tighten the lug nuts, allowing the car to stand and then tightening the lug nuts to the prescribed degree of, for example, 100 Nm. Last but not the least, have the wheel alignment of the front wheel inspected and corrected if needed.

Genuine Kia Sportage Shock Absorber

Suspension Shock Absorber

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

77 Shock Absorbers found

View related parts
Kia Sportage Front Strut Assembly Kit, Left
Part Number: 54650D9120
$145.39 MSRP: $208.00
You Save: $62.61 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Assembly-Front,Lh; Strut
- Position: Front Driver Side
- Replaces: 54650D9800, 54650D9100, 54650D9130
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2022 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Rear Shock Absorber Assembly
Part Number: 553112S011
$161.38 MSRP: $230.87
You Save: $69.49 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly-Rear; Shock, Strut
- Position: Rear
- Replaces: 553113W010, 553112S030
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2010-2013 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Front Strut Assembly Kit, Right
Part Number: 54660D9130
$144.45 MSRP: $206.65
You Save: $62.20 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Assembly-Front,Rh; Strut
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2022 Kia Sportage | 2.0L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Front Strut Assembly Kit, Left
Part Number: 546513W600
$169.90 MSRP: $235.97
You Save: $66.07 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Assembly-Front,Lh
- Position: Front Driver Side
- Replaced by: 546512S300
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2010-2013 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Front Strut Assembly Kit, Right
Part Number: 54660D9120
$144.45 MSRP: $206.65
You Save: $62.20 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Assembly-Front,Rh; Strut
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2019 Kia Sportage | 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Front Strut Assembly Kit, Right
Part Number: 546613W600
$177.06 MSRP: $245.92
You Save: $68.86 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Assembly-Front,Rh
- Position: Front Passenger Side
- Replaced by: 546612S300
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2010-2013 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Front Strut Assembly Kit, Right
Part Number: 546613W500
$169.90 MSRP: $235.97
You Save: $66.07 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Assembly-Front,Rh
- Position: Front Passenger Side
- Replaced by: 546612S650
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2014-2015 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Rear Shock Absorber Assembly
Part Number: 55311D9130
$181.78 MSRP: $252.47
You Save: $70.69 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly-Rear; Shock, Shock Absorber
- Position: Rear
- Replaced by: 55311D3600
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2022 Kia Sportage | 2.0L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Front Strut Assembly Kit, Right
Part Number: 54660D9100
$144.32 MSRP: $206.47
You Save: $62.15 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Assembly-Front,Rh; Strut
- Position: Front Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2019 Kia Sportage | 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Front Strut Assembly Kit, Left
Part Number: 54650D9100
$149.76 MSRP: $208.00
You Save: $58.24 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Assembly-Front,Lh; Strut
- Position: Front Driver Side
- Replaced by: 54650D9120
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2019 Kia Sportage | 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Front Strut Assembly Kit, Left
Part Number: 54650D9130
$149.76 MSRP: $208.00
You Save: $58.24 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Assembly-Front,Lh; Strut
- Position: Front Driver Side
- Replaced by: 54650D9120
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2022 Kia Sportage | 2.0L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Front Strut Assembly Kit, Left
Part Number: 546513W500
$175.91 MSRP: $244.32
You Save: $68.41 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Assembly-Front,Lh
- Position: Front Driver Side
- Replaced by: 546512S650
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2014-2015 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Rear Shock Absorber Assembly, Left
Part Number: 553511F800
$140.41 MSRP: $200.87
You Save: $60.46 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly-Rear,Lh
- Position: Driver Side
- Replaced by: 553512E501
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2010 Kia Sportage | 2.0L - Beta, 2.7L - Delta | Wagon - 5Door 5P
View related parts
Kia Sportage Front Shock Absorber Assembly, Right
Part Number: 0K08034710A
$142.49 MSRP: $197.90
You Save: $55.41 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly-Front,Rh
- Position: Front Passenger Side
- Replaced by: 0K08G34710A
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 1997-2000 Kia Sportage | Low Grade, Middle Grade | 2.0L | 2 Door 5 Canvas Top, 5 Door Wagon
View related parts
Kia Sportage Rear Shock Absorber Assembly, Right
Part Number: 553611F800
$138.45 MSRP: $198.07
You Save: $59.62 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly-Rear,Rh
- Position: REAR Passenger Side
- Replaced by: 553612E501
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2010 Kia Sportage | 2.0L - Beta, 2.7L - Delta | Wagon - 5Door 5P
View related parts
Kia Sportage Rear Shock Absorber Assembly, Right
Part Number: 553612E202
$138.45 MSRP: $198.07
You Save: $59.62 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly-Rear,Rh
- Position: REAR Passenger Side
- Replaced by: 553612E501
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2005-2010 Kia Sportage | High Grade, Middle Grade | 2.0L, 2.0L - Beta, 2.7L, 2.7L - Delta | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sportage Rear Shock Absorber Assembly
Part Number: 55311D9120
$172.87 MSRP: $247.32
You Save: $74.45 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly-Rear; Shock, Shock Absorber
- Position: Rear
- Replaced by: 55311D9140
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2019 Kia Sportage | 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Rear Shock Absorber Assembly, Left
Part Number: 553512E202
$140.41 MSRP: $200.87
You Save: $60.46 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shock Absorber Assembly-Rear,Lh
- Position: Driver Side
- Replaced by: 553512E501
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2005-2010 Kia Sportage | High Grade, Middle Grade | 2.0L, 2.0L - Beta, 2.7L, 2.7L - Delta | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sportage Front Shock Absorber Assembly, Left
Part Number: 546512E201
$169.68 MSRP: $235.67
You Save: $65.99 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut Assembly-Front,Lh
- Position: Front Driver Side
- Replaced by: 546512E500
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2005-2010 Kia Sportage | High Grade, Middle Grade | 2.0L, 2.0L - Beta, 2.7L, 2.7L - Delta | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sportage Front Shock Absorber Assembly, Left
Part Number: 0K08034720
$142.49 MSRP: $197.90
You Save: $55.41 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper Assembly-Front ,Lh ; Shock Absorber Assembly-Front,Lh
- Position: Driver Side
- Replaced by: 0K08G34720
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 1997-2000 Kia Sportage | Low Grade, Middle Grade | 2.0L | 2 Door 5 Canvas Top, 5 Door Wagon

| Page 1 of 4 |Next >

1-20 of 77 Results

Kia Sportage Shock Absorber

It is a Kia Sportage Shock Absorber; this part is an essential part of the car suspension system and remains highly dependable and functional for many models of Kia sportage. Intended to be used in conjunction with the struts, the Shock Absorber is a component that acts to dissipate kinetic energy in the form of heat in order to minimize the effect that unforgiving ground surfaces have on the quality of the ride as well as the vehicle's handling faculties. For the shocks that Kia has used, they have incorporated both the twin tube and mono tube kinds to suit the optimal rates of fluid movement and performance of the shock absorbers to the many guises of driving. Again, innovations like Position Sensitive Damping (PSD) and Acceleration Sensitive Damping (ASD) enable the Shock Absorber to respond to the motion, thus providing the premier experience when driving. Additional to the electrorheological and magnetorheological dampers increase the quality of the Kia Sportage suspension as it includes semi-active and adaptive utility which makes driving more comfortable and safer. This devotion to improvement not only increases productivity but is also crucial for desiring safety, which helps the Sportage to be one of the Insurance Institute for Highway Safety's "Top Safety Picks." Being present on the car market since 1993, Kia Sportage remains a worthy competitor due to the combination of high-quality spare details and thoughtful design which gives the Shock Absorber an important role for drivers who choose their SUV as a reliable and high-performing vehicle.

If you're in search of top-notch, reasonably priced OEM Kia Sportage Shock Absorber, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Sportage Shock Absorber, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Sportage Shock Absorber Parts Questions & Experts Answers

Front Strut Assembly Kit, Left
546513W600
Q: How do you properly remove and install a strut assembly in a Kia Sportage?
A: Placed the car on jackstands and loosen the wheel lug nuts as well as the front part of the car. Pull the parking brake and place chocks at the rear wheels to avoid the car moving off the jack stands and return the wheels. Remove the brake hose from the strut's brake hose channel and in the case of the ABS equipped vehicle, get rid of the ABS harness from its holder. On 2002 and later models you will need to remove the link from the stabilizer bar if it is connected. Take off all the strut to knuckle nuts and bolts, if they are very tight, use hammer and punch to tighten the nuts. Isolate the strut from the Steering Knuckle as it may drop down ward and hit the inner CV joint or the brake line as it comes out. Label the position of the strut mount to the strut tower since wheel alignment will be affected if the strut mount is not placed back to its correct position. With support from another person because of the strut's size and the simplicity of maneuvering, undo the mounting nuts, and carefully retreat it out of the fenderwell. For the strut body examine it for signs of leaks, dents, cracks or contaminants and examine coils spring for damages on the surface of the coating or if there are signs of chapping at the spring seat available. If the above problems are deemed as present, then go ahead to the process of dismantling the strut. For installation, align the strut assembly with the fenderwell, thread the strut mount stud to the shock tower holes and fasten the nuts tightly up to the required torque of the car. Once more, help is advised because of the strut's mass is again quite large to carry by hand. Position the steering knuckle into the strut flange, put the bolts in, then tighten the nuts to the manufactures recommended torque. Plug the brake hose and ABS harness if it is necessary; put the wheel on and tighten the lug nuts, allowing the car to stand and then tightening the lug nuts to the prescribed degree of, for example, 100 Nm. Last but not the least, have the wheel alignment of the front wheel inspected and corrected if needed.