How do you replace the trunk lid latch and Trunk Lock Cylinder on Kia Sportage?

To replace the trunk lid latch, open the trunk and mark a line around the latch assembly for reference. Look upward through the trunk lid access hole to detach the rod from the lock cylinder by removing the rod retaining clip, then separate the rod. Remove the bolts that hold the trunk lid latch in place, and installation follows the reverse order of removal. For the trunk lock cylinder, open the trunk and again look upward through the access hole to detach the rod from the lock cylinder, then remove the mounting bolt or clip to take out the lock cylinder, with installation reversing the removal steps. For Sportage models, start by removing the rear hatch trim panel screws and plastic fasteners, then carefully pry off the trim panel. To access the rear hatch latch, disconnect the electrical connector, the outside handle rod, and the actuator rod, then remove the latch mounting bolts and the latch itself, with installation reversing the removal process. For the rear hatch glass latch, disconnect the hatch glass latch rod, loosen the latch mounting bolts, disconnect the electrical connector, and remove the latch, again reversing the steps for installation. To remove the rear hatch outside handle, disconnect the outside handle rod and the latch rod, then take off the mounting nuts and remove the handle, with installation following the reverse order. For the actuator, disconnect the electrical connector, the outside handle rod, and the glass latch rod, then remove the mounting nuts and bolt, reposition the actuator to access and disconnect the actuator rod and key lock cylinder, and finally remove the actuator, with installation reversing the removal steps.

Genuine Kia Sportage Trunk Latch

Rear Trunk Latch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Trunk Latches found

View related parts
Kia Sportage Tail Gate Latch Assembly
Part Number: 81230D3000
$108.02 MSRP: $153.22
You Save: $45.20 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Tail Gate; Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2022 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Tail Gate Latch Assembly
Part Number: 812301F000
$50.55 MSRP: $71.70
You Save: $21.15 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Tail Gate; Latch, Lock
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2005-2010 Kia Sportage | High Grade, Middle Grade | 2.0L, 2.0L - Beta, 2.7L, 2.7L - Delta | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sportage Tail Gate Latch Assembly
Part Number: 812303W000
$92.95 MSRP: $131.85
You Save: $38.90 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly-Tail Gate; Latch Assembly, Lock
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2010-2015 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Tail Gate Lock Assembly
Part Number: 0K01A62310B
$23.27 MSRP: $32.74
You Save: $9.47 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Back Door ; Lock Assembly-Tail Gate; Lock Assembly
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2002 Kia Sportage | High Grade, Low Grade, Middle Grade | 2.0L | 2 Door 5 Canvas Top
View related parts
Kia Sportage POWER LATCH ASSY-PWR
Part Number: 81800P1100
$297.37 MSRP: $428.00
You Save: $130.63 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2023-2024 Kia Sportage | 1.6L-Gamma-II, 2.5L-THETA-III | Wagon - Long 5Door 5P
View related parts
Kia Sportage Tail Gate Lock Assembly
Part Number: 0K08B62310
$24.42 MSRP: $33.09
You Save: $8.67 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Back Door ; Lock Assembly-Tail Gate
- Replaced by: 0K08B62310A
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 1997-2000 Kia Sportage | Low Grade, Middle Grade | 2.0L | 5 Door Wagon
View related parts
Kia Sportage Tail Gate Lock Assembly
Part Number: 0K08B62310A
$23.52 MSRP: $33.09
You Save: $9.57 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lock Assembly-Back Door ; Lock Assembly-Tail Gate; Lock
- Replaces: 0K08B62310
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 1997-2000 Kia Sportage | Low Grade, Middle Grade | 2.0L | 5 Door Wagon
View related parts
Kia Sportage Latch Assy-Tail Gate
Part Number: 81800P2000
$87.77 MSRP: $124.50
You Save: $36.73 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Latch Assembly, Lock Actuator
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2023-2024 Kia Sportage | 1.6L-Gamma-II, 2.5L-THETA-III | Wagon - Long 5Door 5P
View related parts
Kia Sportage Tail Gate Lock Assembly
Part Number: 0K01A62310
Product Specifications
- Other Name: Lock Assembly-Back Door ; Lock Assembly-Tail Gate; Lock, Lock Assembly
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 1997-2002 Kia Sportage | High Grade, Low Grade, Middle Grade | 2.0L | 2 Door 5 Canvas Top
View related parts
Kia Sportage Rear Tail Gate Lock Assembly
Part Number: 0K08B62310B
Product Specifications
- Other Name: Lock Assembly-Back Door ; Lock Assembly-Tail Gate; Lock, Lock Assembly
- Position: Rear
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 1997-2002 Kia Sportage | High Grade, Low Grade, Middle Grade | 2.0L | 5 Door Wagon
View related parts
Kia Sportage Tail Gate Lock Assembly
Part Number: 0K01A62310A
Product Specifications
- Other Name: Lock Assembly-Back Door ; Lock Assembly-Tail Gate; Lock Assembly
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2002 Kia Sportage | High Grade, Low Grade, Middle Grade | 2.0L | 2 Door 5 Canvas Top

Kia Sportage Trunk Latch

If you're in search of top-notch, reasonably priced OEM Kia Sportage Trunk Latch, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Sportage Trunk Latch, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Sportage Trunk Latch Parts Questions & Experts Answers

Tail Gate Latch Assembly
812301F000
Q: How do you replace the trunk lid latch and Trunk Lock Cylinder on Kia Sportage?
A: To replace the trunk lid latch, open the trunk and mark a line around the latch assembly for reference. Look upward through the trunk lid access hole to detach the rod from the lock cylinder by removing the rod retaining clip, then separate the rod. Remove the bolts that hold the trunk lid latch in place, and installation follows the reverse order of removal. For the trunk lock cylinder, open the trunk and again look upward through the access hole to detach the rod from the lock cylinder, then remove the mounting bolt or clip to take out the lock cylinder, with installation reversing the removal steps. For Sportage models, start by removing the rear hatch trim panel screws and plastic fasteners, then carefully pry off the trim panel. To access the rear hatch latch, disconnect the electrical connector, the outside handle rod, and the actuator rod, then remove the latch mounting bolts and the latch itself, with installation reversing the removal process. For the rear hatch glass latch, disconnect the hatch glass latch rod, loosen the latch mounting bolts, disconnect the electrical connector, and remove the latch, again reversing the steps for installation. To remove the rear hatch outside handle, disconnect the outside handle rod and the latch rod, then take off the mounting nuts and remove the handle, with installation following the reverse order. For the actuator, disconnect the electrical connector, the outside handle rod, and the glass latch rod, then remove the mounting nuts and bolt, reposition the actuator to access and disconnect the actuator rod and key lock cylinder, and finally remove the actuator, with installation reversing the removal steps.