Kia 585002G200 Booster & Master Cylinder

You can Select Your Vehicle to check if 585002G200 fits your vehicle.

The brake system should be inspected every time the wheels are removed or whenever a defect is suspected.

Place rags under the fittings and prepare caps or plastic bags for the ends of the lines after disconnection.

Begin by removing the brake master cylinder. For some models, it may be necessary to entirely remove the brake lines that cross in front of the master cylinder. Carefully disconnect the vacuum hose from the brake booster, then remove the brake pedal return spring near the top of the brake pedal, followed by the clevis pin retaining clip and the pin. Remove the four fasteners holding the brake booster to the firewall and slide the booster straight out until the studs clear the holes.