How do you remove and install the control arm and tension arm on Kia Sedona?

Only models from 2005 and earlier are equipped with tension arms. To remove the control arm, first loosen the wheel lug nuts, raise the front of the vehicle, and support it securely on jackstands before removing the wheel. For 2005 and earlier models, detach the stabilizer bar link from the control arm, then remove the cotter pin (if equipped) and the balljoint-to-steering knuckle pinch bolt, separating the balljoint from the steering knuckle while being careful not to damage the balljoint boot. Next, remove the tension arm-to-control arm mounting nuts/bolts and the control arm-to-subframe nut/pivot bolt to take out the control arm. For models from 2006 and later, remove the front bolt attaching the control arm to the subframe, followed by the rear nut/pivot bolt to detach the control arm. Inspect the control arm for straightness, replacing it if bent, and check all bushings for cracks, distortion, and tears, taking the assembly to an automotive machine shop for replacement if necessary. For installation, position the control arm in the subframe and install the bolts and nuts without tightening them yet. For 2005 and earlier models, install the tension arm-to-control arm bolts and nuts without tightening. Reinstall the balljoint to the steering knuckle and tighten the pinch bolt/nut to the specified torque. Use a floor jack under the control arm, raise it to simulate normal ride height, and then tighten the control arm bolt(s) and tension arm nuts/bolts for 2005 and earlier models to the specified torque. Finally, install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the specified torque, ensuring the front wheel alignment is checked and adjusted if necessary. For the tension arm on 2005 and earlier models, loosen the wheel lug nuts, raise the front of the vehicle, and support it securely on jackstands before removing the wheel. Remove the tension arm-to-control arm mounting nuts/bolts, mark the relationship of the tension arm nuts to the tension arm, unscrew the forward tension arm nut, and detach the tension arm and bushings from the subframe. Installation is the reverse of removal, aligning the marks on the tension arm nuts with the mark made on the arm, then tightening the forward nut to the specified torque. Finally, install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the specified torque, ensuring the front wheel alignment is checked and adjusted if necessary.

Genuine Kia Sedona Control Arm

Suspension Arm

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

19 Control Arms found

View related parts
Kia Sedona Arm Complete-Front Lower
Part Number: 54500A9100
$227.18 MSRP: $325.00
You Save: $97.82 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Complete-Front Lower,LH; Lower Control Arm
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2021 Kia Sedona | 3.3L - Lambda 2 | Wagon Long - 7P, Wagon Long - 8P
View related parts
Kia Sedona Arm Complete-Front Lower
Part Number: 54501A9100
$227.18 MSRP: $325.00
You Save: $97.82 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Complete-Front Lower,RH; Lower Control Arm
- Position: Front Lower Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2021 Kia Sedona | 3.3L - Lambda 2 | Wagon Long - 7P, Wagon Long - 8P
View related parts
Kia Sedona Arm Complete-Front Lower
Part Number: 545004D102
$143.32 MSRP: $205.03
You Save: $61.71 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Complete-Front Lower,LH; Lower Control Arm
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | 3.5L - Lambda 2, 3.8L - Lambda | Wagon Long - 7P, Wagon Short - 7P
View related parts
Kia Sedona Arm Complete-Front Lower
Part Number: 545014D102
$143.32 MSRP: $205.03
You Save: $61.71 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Complete-Front Lower,RH; Lower Control Arm
- Position: Front Lower Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | 3.5L - Lambda 2, 3.8L - Lambda | Wagon Long - 7P, Wagon Short - 7P
View related parts
Kia Sedona Arm & Bush Assembly-Suspension
Part Number: 55101A9000
$124.45 MSRP: $178.03
You Save: $53.58 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm & Bush Assembly-Suspension Upper, RH; Upper Control Arm
- Position: Upper Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2021 Kia Sedona | 3.3L - Lambda 2 | Wagon Long - 7P, Wagon Long - 8P
View related parts
Kia Sedona Arm Complete-Rear Lower
Part Number: 552104D170
$173.83 MSRP: $248.68
You Save: $74.85 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Complete-Rear Lower,LH; Lower Control Arm
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | 3.5L - Lambda 2, 3.8L - Lambda | Wagon Long - 7P, Wagon Short - 7P
View related parts
Kia Sedona Arm Complete-Rear Lower
Part Number: 552204D170
$173.83 MSRP: $248.68
You Save: $74.85 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Complete-Rear Lower,RH; Lower Control Arm
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | 3.5L - Lambda 2, 3.8L - Lambda | Wagon Long - 7P, Wagon Short - 7P
View related parts
Kia Sedona Arm Assembly-Rear Suspension
Part Number: 55210A9100
$200.80 MSRP: $287.27
You Save: $86.47 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly-Rear Suspension Rear,LH; Lower Control Arm
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2021 Kia Sedona | 3.3L - Lambda 2 | Wagon Long - 7P, Wagon Long - 8P
View related parts
Kia Sedona Arm Assembly-Rear Suspension
Part Number: 55220A9100
$200.80 MSRP: $287.27
You Save: $86.47 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly-Rear Suspension Rear,RH; Lower Control Arm
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2015-2021 Kia Sedona | 3.3L - Lambda 2 | Wagon Long - 7P, Wagon Long - 8P
View related parts
Kia Sedona Arm Complete-Front Lower
Part Number: 545004D100
$147.65 MSRP: $205.07
You Save: $57.42 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Complete-Front Lower,LH
- Position: Driver Side
- Replaced by: 545004D101
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | High Grade, Middle Grade | 3.5L - Lambda 2, 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7
View related parts
Kia Sedona Arm Complete-Front Lower
Part Number: 545004D101
$143.34 MSRP: $205.07
You Save: $61.73 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Complete-Front Lower,LH; Lower Control Arm
- Position: Driver Side
- Replaces: 545004D100
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | High Grade, Middle Grade | 3.5L - Lambda 2, 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7
View related parts
Kia Sedona Arm Assembly-Rear Upper RH
Part Number: 552404D001
$224.75 MSRP: $321.53
You Save: $96.78 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly-Rear Upper,RH; Upper Control Arm
- Position: Rear Upper Passenger Side
- Replaces: 552404D000
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | High Grade, Middle Grade | 3.5L - Lambda 2, 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7
View related parts
Kia Sedona Arm Assembly-Rear Upper LH
Part Number: 552304D001
$211.25 MSRP: $302.22
You Save: $90.97 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly-Rear Upper,LH; Upper Control Arm
- Position: Rear Upper Driver Side
- Replaces: 552304D000
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | High Grade, Middle Grade | 3.5L - Lambda 2, 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7
View related parts
Kia Sedona Arm Complete-Front Lower
Part Number: 545014D100
$147.65 MSRP: $205.07
You Save: $57.42 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Complete-Front Lower,RH
- Position: Front Lower Passenger Side
- Replaced by: 545014D101
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | High Grade, Middle Grade | 3.5L - Lambda 2, 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7
View related parts
Kia Sedona Arm Complete-Front Lower
Part Number: 545014D101
$143.34 MSRP: $205.07
You Save: $61.73 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Complete-Front Lower,RH; Lower Control Arm
- Position: Front Lower Passenger Side
- Replaces: 545014D100
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | High Grade, Middle Grade | 3.5L - Lambda 2, 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7
View related parts
Kia Sedona Arm Complete-Rear Lower
Part Number: 552104D150
$173.83 MSRP: $248.68
You Save: $74.85 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Complete-Rear Lower,LH; Lower Control Arm
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | High Grade, Middle Grade | 3.5L - Lambda 2, 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7
View related parts
Kia Sedona Arm Complete-Rear Lower
Part Number: 552204D150
$173.83 MSRP: $248.68
You Save: $74.85 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Complete-Rear Lower,RH; Lower Control Arm
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | High Grade, Middle Grade | 3.5L - Lambda 2, 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7
View related parts
Kia Sedona Arm Assembly-Rear Upper RH
Part Number: 552404D000
$231.50 MSRP: $321.53
You Save: $90.03 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly-Rear Upper,RH
- Position: Rear Upper Passenger Side
- Replaced by: 552404D001
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | High Grade, Middle Grade | 3.5L - Lambda 2, 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7
View related parts
Kia Sedona Arm Assembly-Rear Upper LH
Part Number: 552304D000
$217.60 MSRP: $302.22
You Save: $84.62 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Arm Assembly-Rear Upper,LH
- Position: Rear Upper Driver Side
- Replaced by: 552304D001
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2014 Kia Sedona | High Grade, Middle Grade | 3.5L - Lambda 2, 3.8L, 3.8L - Lambda | Wagon Long - 7P, Wagon Long 7, Wagon Short - 7P, Wagon Short 7

Kia Sedona Control Arm

If you're in search of top-notch, reasonably priced OEM Kia Sedona Control Arm, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Sedona Control Arm, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Sedona Control Arm Parts Questions & Experts Answers

Arm Complete-Front Lower
545004D102
Q: How do you remove and install the control arm and tension arm on Kia Sedona?
A: Only models from 2005 and earlier are equipped with tension arms. To remove the control arm, first loosen the wheel lug nuts, raise the front of the vehicle, and support it securely on jackstands before removing the wheel. For 2005 and earlier models, detach the stabilizer bar link from the control arm, then remove the cotter pin (if equipped) and the balljoint-to-Steering Knuckle pinch bolt, separating the balljoint from the steering knuckle while being careful not to damage the balljoint boot. Next, remove the tension arm-to-control arm mounting nuts/bolts and the control arm-to-subframe nut/pivot bolt to take out the control arm. For models from 2006 and later, remove the front bolt attaching the control arm to the subframe, followed by the rear nut/pivot bolt to detach the control arm. Inspect the control arm for straightness, replacing it if bent, and check all bushings for cracks, distortion, and tears, taking the assembly to an automotive machine shop for replacement if necessary. For installation, position the control arm in the subframe and install the bolts and nuts without tightening them yet. For 2005 and earlier models, install the tension arm-to-control arm bolts and nuts without tightening. Reinstall the balljoint to the steering knuckle and tighten the pinch bolt/nut to the specified torque. Use a floor jack under the control arm, raise it to simulate normal ride height, and then tighten the control arm bolt(s) and tension arm nuts/bolts for 2005 and earlier models to the specified torque. Finally, install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the specified torque, ensuring the front wheel alignment is checked and adjusted if necessary. For the tension arm on 2005 and earlier models, loosen the wheel lug nuts, raise the front of the vehicle, and support it securely on jackstands before removing the wheel. Remove the tension arm-to-control arm mounting nuts/bolts, mark the relationship of the tension arm nuts to the tension arm, unscrew the forward tension arm nut, and detach the tension arm and bushings from the subframe. Installation is the reverse of removal, aligning the marks on the tension arm nuts with the mark made on the arm, then tightening the forward nut to the specified torque. Finally, install the wheel and lug nuts, lower the vehicle, and tighten the lug nuts to the specified torque, ensuring the front wheel alignment is checked and adjusted if necessary.

Related Kia Sedona Parts

Browse by Year

2021 Control Arm 2020 Control Arm 2019 Control Arm 2018 Control Arm 2017 Control Arm 2016 Control Arm 2015 Control Arm 2014 Control Arm 2013 Control Arm 2012 Control Arm 2011 Control Arm 2010 Control Arm 2009 Control Arm 2008 Control Arm 2007 Control Arm 2006 Control Arm