How to remove and install a hood safely and correctly on Kia Sportage?

If you wish to remove and install the hood, it is wished that at least two people do it because the product is quite heavy and rather inconvenient. Start by protecting the vehicle body especially the fenders and the cowl region by use of blankets or padding. Mark the required positions for the centering of the stud by writing or sketching around the bolt heads and hinge plates. Any cables or wire harnesses that are in the way of removal should be disconnected. Two people, one on each side, unlock the bolts on the hood to the front bumper; keep steady the hood with your shoulder, and lift the hood away. While installing, align the hood's hinges with the scribe marks made earlier; if a new hood is used, or if the marks were not made, adjust as seen fit. Check and fine-tune the position of the fore-and-aft and right-and-left positions of the hood by using the elongated holes for the hinges, then scribe a reference line around the zone of the hinge plate. Spin the steering wheel back and forth and lessen the tension through the bolts by using the hood to check for alignments. For the change of the height as perceived vertically, the position of the edge cushions must be screwed in or out so that the hood aligns with the fenders, and for the hoods of the car that are frequently opened and closed, the latches and the hood hinges must be greased with white lithium-base grease to prevent sticking and wearing.

Genuine Kia Sportage Hood

Engine Hood

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Hoods found

View related parts
Kia Sportage Panel Assembly-Hood
Part Number: 66400D9000
$479.06 MSRP: $703.47
You Save: $224.41 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2022 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Panel Assembly-Hood
Part Number: 66400D9100
$457.20 MSRP: $671.37
You Save: $214.17 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2022 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Panel Assembly-Hood
Part Number: 664003W000
$429.14 MSRP: $617.65
You Save: $188.51 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2010-2015 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage PANEL ASSY-HOOD
Part Number: 66400P1000
$438.82 MSRP: $631.58
You Save: $192.76 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2023-2024 Kia Sportage | 1.6L-Gamma-II | Wagon - Long 5Door 5P
View related parts
Kia Sportage PANEL ASSY-HOOD
Part Number: 66400DW000
$1130.39 MSRP: $1659.90
You Save: $529.51 (32%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2023-2024 Kia Sportage | 2.5L-THETA-III | Wagon - Long 5Door 5P
View related parts
Kia Sportage Panel Assembly-Hood
Part Number: 664001F010
$430.69 MSRP: $619.89
You Save: $189.20 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hood
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2005-2010 Kia Sportage | High Grade, Middle Grade | 2.0L, 2.0L - Beta, 2.7L, 2.7L - Delta | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sportage Hood Assembly
Part Number: 0K01F52310A
$220.06 MSRP: $314.82
You Save: $94.76 (31%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel Assembly-Hood; Hood
- Manufacturer Note: S.ASIA
- Replaces: 0K01F52310
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 1997-2002 Kia Sportage | High Grade, Low Grade, Middle Grade | 2.0L | 2 Door 5 Canvas Top, 5 Door Wagon
View related parts
Kia Sportage Hood Assembly
Part Number: 0K01F52310
$226.67 MSRP: $314.82
You Save: $88.15 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Panel Assembly-Hood
- Manufacturer Note: S.ASIA
- Replaced by: 0K01F52310A
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 1997-2000 Kia Sportage | Low Grade, Middle Grade | 2.0L | 2 Door 5 Canvas Top, 5 Door Wagon

Kia Sportage Hood

If you're in search of top-notch, reasonably priced OEM Kia Sportage Hood, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Sportage Hood, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Sportage Hood Parts Questions & Experts Answers

Panel Assembly-Hood
664001F010
Q: How to remove and install a hood safely and correctly on Kia Sportage?
A: If you wish to remove and install the hood, it is wished that at least two people do it because the product is quite heavy and rather inconvenient. Start by protecting the vehicle body especially the Fenders and the cowl region by use of blankets or padding. Mark the required positions for the centering of the stud by writing or sketching around the bolt heads and hinge plates. Any cables or wire harnesses that are in the way of removal should be disconnected. Two people, one on each side, unlock the bolts on the hood to the front bumper; keep steady the hood with your shoulder, and lift the hood away. While installing, align the hood's hinges with the scribe marks made earlier; if a new hood is used, or if the marks were not made, adjust as seen fit. Check and fine-tune the position of the fore-and-aft and right-and-left positions of the hood by using the elongated holes for the hinges, then scribe a reference line around the zone of the hinge plate. Spin the steering wheel back and forth and lessen the tension through the bolts by using the hood to check for alignments. For the change of the height as perceived vertically, the position of the edge cushions must be screwed in or out so that the hood aligns with the fenders, and for the hoods of the car that are frequently opened and closed, the latches and the hood hinges must be greased with white lithium-base grease to prevent sticking and wearing.