What are the steps involved in front stabilizer bar link and bushing removal and installation on Kia Sportage?

The procedures that are used to remove the sway bar kit entail the following where the crossmember of the suspension is lowered and the sway bar kit is taken from behind; normally where there is harm on the bar, it is due to severe influences accorded to it from accidents that may have affected other significant apparatus and thus called for professional repair. Start the procedure with the removal of the wheel lug nuts, lifting of the front part of the car and placing on stands together with an application of park brake and placing of the rear wheels on blocks. Wheels need to be removed first, then use an Allen wrench to hold the ballstud and knock the nut off to get the link off the lower control arm / strut. For the 1997 and the models prior to that, the links are secured to the lower control arms by a bolt; the 2002 models and the models that come after it, the links are mounted to the front struts. Third, it is necessary to take out the sway bar brackets and Sway Bar Bushing and check the bushings for cracks or tears; if the bushings are damaged, put a new one in their place. Next, clean the bushings and lubricate them with silicone lubricant or vegetable oil and then assemble the bushings on to the bar, brackets and bolts followed by tightening until the specified torque tightness is achieved. For the models of Sportage, it is necessary to remove the lower cross bar of sway bar kit of an engine/transaxle subframe, and besides it is needed to lower the mentioned member also. One has to take out the nuts on the sway bar link rods and the bolts uncovering the lower control arm ball joint and front exhaust pipe. With regards to the 4 wheel drive, the driveshaft needs to be detached from the vehicle and the oil of the transfer case needs to be drained. You also have to unbolt the rear flange assembly and depending on the model of Montero, the intermediate shaft has to be disengaged from the steering gear. Remove the power steering fluid, and unbolt the pressure line fittings; supporting the engine/transaxle assembly and subframe with hydraulic jacks. Bolt securing the engine to the subframe, and subframe to the vehicle frame should be undone and the subframe lowered slightly to allow removal of the LB sway bar assembly and examination of the condition of the clamp bushes. Installation involves the opposite of what is required in removal in regard to fasteners, where all has to be tightened. At long last, fix the wheel and lugs and then lower the vehicle and uniformly tighten lugs to their required torque.

Genuine Kia Sportage Sway Bar Link

Stabilizer Sway Bar Link

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

19 Sway Bar Links found

View related parts
Kia Sportage Link Assembly-Rear Stabilizer
Part Number: 55540D3000
$52.85 MSRP: $74.97
You Save: $22.12 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link Assembly-Rear Stabilizer,RH; Link, Stabilizer Link
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2022 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Link Assembly-Rear Stabilizer
Part Number: 555303R000
$38.06 MSRP: $53.98
You Save: $15.92 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Link, Stabilizer Link
- Position: Rear
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2010-2015 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Drop Link
Part Number: 0K01134160A
$41.00 MSRP: $58.15
You Save: $17.15 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Link, Stabilizer Link
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 1997-2002 Kia Sportage | High Grade, Low Grade, Middle Grade | 2.0L | 2 Door 5 Canvas Top, 5 Door Wagon
View related parts
Kia Sportage Link Assembly-Rear Stabilizer
Part Number: 555403R000
$40.11 MSRP: $56.90
You Save: $16.79 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Link Assembly-Rear Stabilizer,RH; Link, Stabilizer Link
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2010-2015 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Link Assembly-Rear Stabilizer
Part Number: 555302S200
$38.06 MSRP: $53.98
You Save: $15.92 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link, Stabilizer Link
- Position: Rear
- Replaces: 555302S100
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2010-2015 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Link-Stabilizer
Part Number: 54830D9000
$65.55 MSRP: $92.99
You Save: $27.44 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link, Stabilizer Link
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2022 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Link Assembly-Rear Stabilizer
Part Number: 555301F000
$39.59 MSRP: $56.15
You Save: $16.56 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Link, Stabilizer Link
- Position: Rear
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2005-2010 Kia Sportage | High Grade, Middle Grade | 2.0L, 2.0L - Beta, 2.7L, 2.7L - Delta | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sportage Link-Stabilizer
Part Number: 548303W300
$63.51 MSRP: $86.77
You Save: $23.26 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Replaced by: 548301S000
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2010-2013 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Link Assembly-Rear Stabilizer
Part Number: 555302Z100
$46.65 MSRP: $66.17
You Save: $19.52 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Link, Stabilizer Link
- Position: Rear
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2014-2015 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Link Assembly-Rear Stabilizer
Part Number: 55530D3000
$52.85 MSRP: $74.97
You Save: $22.12 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link Assembly-Rear Stabilizer,LH; Link, Stabilizer Link
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2022 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Link-Stabilizer
Part Number: 548302S000
$63.51 MSRP: $86.77
You Save: $23.26 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 548301S000
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2010-2013 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Link-Stabilizer
Part Number: 548302S200
$63.51 MSRP: $86.77
You Save: $23.26 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Replaced by: 548301S000
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2010-2013 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Link Assembly-Front Stabilizer
Part Number: 548301F000
$55.71 MSRP: $76.10
You Save: $20.39 (27%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Position: Front
- Replaced by: 548302E200
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2005-2010 Kia Sportage | High Grade, Middle Grade | 2.0L, 2.0L - Beta, 2.7L, 2.7L - Delta | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sportage Link-Stabilizer
Part Number: 548302S500
$68.28 MSRP: $96.85
You Save: $28.57 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Link, Stabilizer Link
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2014-2015 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage LINK ASSY-FRONT STAB
Part Number: 54830N9000
$61.66 MSRP: $87.47
You Save: $25.81 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Front
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2023-2024 Kia Sportage | 2.5L-THETA-III | Wagon - Long 5Door 5P
View related parts
Kia Sportage Link Assembly-Rear Stabilizer
Part Number: 555302S100
$39.52 MSRP: $53.98
You Save: $14.46 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Rear
- Replaced by: 555302S200
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2010-2013 Kia Sportage | 2.0L - Theta 2, 2.4L - Theta 2 | Wagon - 5Door 5P
View related parts
Kia Sportage Link Assembly-Rear STABI
Part Number: 55530N9000
$53.10 MSRP: $75.32
You Save: $22.22 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Rear
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2023-2024 Kia Sportage | 1.6L-Gamma-II, 2.5L-THETA-III | Wagon - Long 5Door 5P
View related parts
Kia Sportage Link Assembly-Rear STABI
Part Number: 55531N9000
$53.10 MSRP: $75.32
You Save: $22.22 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Position: Rear
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2023-2024 Kia Sportage | 1.6L-Gamma-II, 2.5L-THETA-III | Wagon - Long 5Door 5P
View related parts
Kia Sportage LINK-STABILIZER
Part Number: 54830P1000
$62.75 MSRP: $89.00
You Save: $26.25 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2023-2024 Kia Sportage | 1.6L-Gamma-II | Wagon - Long 5Door 5P

Kia Sportage Sway Bar Link

Kia Sportage Sway Bar Link is among the most crucial parts, which greatly impact the functioning of the vehicle and its protection. Sway Bar Link is engaged here with the help of the control arm and its primary responsibility is to control the body roll and distribute equal weight throughout the car, especially during cornering. Not only does it enhance the maneuverability but it also enhances the ride quality which makes Kia Sportage one of the prime options that one can look up to when in search of a car which is efficient and stable. This replacement Sway Bar Link is applicable to sporadage models and this product can effectively transmit motion between the control arm and the sway bar to improve the suspension performance. The Kia Sportage stimulate a lot of attention due to its safety features, new design and high quality parts such as Sway Bar Link that are core to the functionality of the vehicle. That is why, with concern to the safety, it is possible to mention such accomplishments as, for example, "Top Safety Pick" according to the Insurance Institute for Highway Safety, which proves the successful positioning of the Sportage in the automotive industry. Sway Bar Link also makes the driving experience much more thrilling while keeping the Kia Sportage as a serious contender in SUV segment. Besides, it is well-built and functions effectively, occupying a special place among the attributes that ensure the vehicle's safety and performance. All in all, the Kia Sportage Sway Bar Link therefore remains one of the crucial and essential parts of Kia Sportage, which contributes to reliability and performance of this vehicle.

If you're in search of top-notch, reasonably priced OEM Kia Sportage Sway Bar Link, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Sportage Sway Bar Link, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Sportage Sway Bar Link Parts Questions & Experts Answers

Link Assembly-Front Stabilizer
548301F000
Q: What are the steps involved in front stabilizer bar link and bushing removal and installation on Kia Sportage?
A: The procedures that are used to remove the Sway Bar Kit entail the following where the crossmember of the suspension is lowered and the sway bar kit is taken from behind; normally where there is harm on the bar, it is due to severe influences accorded to it from accidents that may have affected other significant apparatus and thus called for professional repair. Start the procedure with the removal of the wheel lug nuts, lifting of the front part of the car and placing on stands together with an application of park brake and placing of the rear wheels on blocks. Wheels need to be removed first, then use an Allen wrench to hold the ballstud and knock the nut off to get the link off the lower Control Arm / strut. For the 1997 and the models prior to that, the links are secured to the lower control arms by a bolt; the 2002 models and the models that come after it, the links are mounted to the front struts. Third, it is necessary to take out the sway bar brackets and Sway Bar Bushing and check the bushings for cracks or tears; if the bushings are damaged, put a new one in their place. Next, clean the bushings and lubricate them with silicone lubricant or vegetable oil and then assemble the bushings on to the bar, brackets and bolts followed by tightening until the specified torque tightness is achieved. For the models of Sportage, it is necessary to remove the lower cross bar of sway bar kit of an engine/transaxle subframe, and besides it is needed to lower the mentioned member also. One has to take out the nuts on the sway bar link rods and the bolts uncovering the lower control arm ball joint and front exhaust pipe. With regards to the 4 wheel drive, the driveshaft needs to be detached from the vehicle and the oil of the transfer case needs to be drained. You also have to unbolt the rear flange assembly and depending on the model of Montero, the intermediate shaft has to be disengaged from the steering gear. Remove the power steering fluid, and unbolt the pressure line fittings; supporting the engine/transaxle assembly and subframe with hydraulic jacks. Bolt securing the engine to the subframe, and subframe to the vehicle frame should be undone and the subframe lowered slightly to allow removal of the LB sway bar assembly and examination of the condition of the clamp bushes. Installation involves the opposite of what is required in removal in regard to fasteners, where all has to be tightened. At long last, fix the wheel and lugs and then lower the vehicle and uniformly tighten lugs to their required torque.