How do you replace the trunk lid latch and Trunk Lock Cylinder on Kia Sportage?

To replace the trunk lid latch, open the trunk and mark a line around the latch assembly for reference. Look upward through the trunk lid access hole to detach the rod from the lock cylinder by removing the rod retaining clip, then separate the rod. Remove the bolts that hold the trunk lid latch in place, and installation follows the reverse order of removal. For the trunk lock cylinder, open the trunk and again look upward through the access hole to detach the rod from the lock cylinder, then remove the mounting bolt or clip to take out the lock cylinder, with installation reversing the removal steps. For Sportage models, start by removing the rear hatch trim panel screws and plastic fasteners, then carefully pry off the trim panel. To access the rear hatch latch, disconnect the electrical connector, the outside handle rod, and the actuator rod, then remove the latch mounting bolts and the latch itself, with installation reversing the removal process. For the rear hatch glass latch, disconnect the hatch glass latch rod, loosen the latch mounting bolts, disconnect the electrical connector, and remove the latch, again reversing the steps for installation. To remove the rear hatch outside handle, disconnect the outside handle rod and the latch rod, then take off the mounting nuts and remove the handle, with installation following the reverse order. For the actuator, disconnect the electrical connector, the outside handle rod, and the glass latch rod, then remove the mounting nuts and bolt, reposition the actuator to access and disconnect the actuator rod and key lock cylinder, and finally remove the actuator, with installation reversing the removal steps.

Genuine Kia Sportage Trunk Lock Cylinder

Back Door Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Trunk Lock Cylinders found

View related parts
Kia Sportage Back Door Key Sub Set
Part Number: 0K07F76960
$24.83 MSRP: $33.65
You Save: $8.82 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Sub Set-Back Door
- Replaced by: 0K07F76960A
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2002 Kia Sportage | High Grade, Low Grade, Middle Grade | 2.0L | 2 Door 5 Canvas Top
View related parts
Kia Sportage Back Door Key Sub Set
Part Number: 0K07F76960A
$23.93 MSRP: $33.65
You Save: $9.72 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Sub Set-Back Door; Cylinder & Keys
- Replaces: 0K07F76960
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2002 Kia Sportage | High Grade, Low Grade, Middle Grade | 2.0L | 2 Door 5 Canvas Top
View related parts
Kia Sportage Back Door Key Sub Set
Part Number: 0K07H76960
$26.84 MSRP: $36.37
You Save: $9.53 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Sub Set-Back Door
- Replaced by: 0K07H76960A
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2002 Kia Sportage | High Grade, Low Grade, Middle Grade | 2.0L | 2 Door 5 Canvas Top
View related parts
Kia Sportage Back Door Key Sub Set
Part Number: 0K07H76960A
$26.84 MSRP: $36.37
You Save: $9.53 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Sub Set-Back Door
- Replaces: 0K07H76960
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2002 Kia Sportage | High Grade, Low Grade, Middle Grade | 2.0L | 2 Door 5 Canvas Top
View related parts
Kia Sportage Back Door Key Sub Set
Part Number: 0K07E76960
$28.47 MSRP: $38.58
You Save: $10.11 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Sub Set-Back Door
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2002 Kia Sportage | High Grade, Low Grade, Middle Grade | 2.0L | 5 Door Wagon
View related parts
Kia Sportage Back Door Key Sub Set
Part Number: 812501FA00
$46.19 MSRP: $65.52
You Save: $19.33 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Sub Set-Back Door; Lock Cylinder
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2005-2010 Kia Sportage | High Grade, Middle Grade | 2.0L, 2.0L - Beta, 2.7L, 2.7L - Delta | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sportage Back Door Key Sub Set
Part Number: 0K08E76930
$50.58 MSRP: $69.10
You Save: $18.52 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Sub Set-Back Door
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 1997-2000 Kia Sportage | Low Grade, Middle Grade | 2.0L | 2 Door 5 Canvas Top
View related parts
Kia Sportage Back Door Key Sub Set
Part Number: 812501FC00
$56.79 MSRP: $80.55
You Save: $23.76 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Sub Set-Back Door; Lock Cylinder
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2005-2010 Kia Sportage | High Grade, Middle Grade | 2.0L, 2.0L - Beta, 2.7L, 2.7L - Delta | 5 Door Wagon, Wagon - 5Door 5P
View related parts
Kia Sportage Back Door Key Sub Set
Part Number: 812501FC01
$63.50 MSRP: $86.75
You Save: $23.25 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Sub Set-Back Door
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2010 Kia Sportage | 2.0L - Beta, 2.7L - Delta | Wagon - 5Door 5P
View related parts
Kia Sportage Back Door Key Sub Set
Part Number: 0K07D76960
$25.36 MSRP: $34.37
You Save: $9.01 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Sub Set-Back Door
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2002 Kia Sportage | High Grade, Low Grade, Middle Grade | 2.0L | 5 Door Wagon
View related parts
Kia Sportage Back Door Key Sub Set
Part Number: 0K07A76960
$26.84 MSRP: $36.37
You Save: $9.53 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Sub Set-Back Door
- Replaced by: 0K07A76960A
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2002 Kia Sportage | High Grade, Low Grade, Middle Grade | 2.0L | 5 Door Wagon
View related parts
Kia Sportage Back Door Key Sub Set
Part Number: 0K07A76960A
$25.86 MSRP: $36.37
You Save: $10.51 (29%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Key Sub Set-Back Door; Cylinder & Keys
- Replaces: 0K07A76960
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2002 Kia Sportage | High Grade, Low Grade, Middle Grade | 2.0L | 5 Door Wagon
View related parts
Kia Sportage Back Door Key Sub Set
Part Number: 0K08A76930
Product Specifications
- Other Name: Key Sub Set-Back Door; Lock Cylinder
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 1997-2000 Kia Sportage | Low Grade, Middle Grade | 2.0L | 5 Door Wagon
View related parts
Kia Sportage Back Door Key Sub Set
Part Number: 0K07B76960
Product Specifications
- Other Name: Key Sub Set-Back Door
- Replaced by: 0K07B76960A
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2002 Kia Sportage | High Grade, Low Grade, Middle Grade | 2.0L | 5 Door Wagon
View related parts
Kia Sportage Back Door Key Sub Set
Part Number: 0K07B76960A
Product Specifications
- Other Name: Key Sub Set-Back Door
- Replaces: 0K07B76960
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2002 Kia Sportage | High Grade, Low Grade, Middle Grade | 2.0L | 5 Door Wagon

Kia Sportage Trunk Lock Cylinder

If you're in search of top-notch, reasonably priced OEM Kia Sportage Trunk Lock Cylinder, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Sportage Trunk Lock Cylinder, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Sportage Trunk Lock Cylinder Parts Questions & Experts Answers

Back Door Key Sub Set
812501FC01
Q: How do you replace the trunk lid latch and Trunk Lock Cylinder on Kia Sportage?
A: To replace the trunk lid latch, open the trunk and mark a line around the latch assembly for reference. Look upward through the trunk lid access hole to detach the rod from the lock cylinder by removing the rod retaining clip, then separate the rod. Remove the bolts that hold the trunk lid latch in place, and installation follows the reverse order of removal. For the trunk lock cylinder, open the trunk and again look upward through the access hole to detach the rod from the lock cylinder, then remove the mounting bolt or clip to take out the lock cylinder, with installation reversing the removal steps. For Sportage models, start by removing the rear hatch trim panel screws and plastic fasteners, then carefully pry off the trim panel. To access the rear hatch latch, disconnect the electrical connector, the outside handle rod, and the actuator rod, then remove the latch mounting bolts and the latch itself, with installation reversing the removal process. For the rear hatch glass latch, disconnect the hatch glass latch rod, loosen the latch mounting bolts, disconnect the electrical connector, and remove the latch, again reversing the steps for installation. To remove the rear hatch outside handle, disconnect the outside handle rod and the latch rod, then take off the mounting nuts and remove the handle, with installation following the reverse order. For the actuator, disconnect the electrical connector, the outside handle rod, and the glass latch rod, then remove the mounting nuts and bolt, reposition the actuator to access and disconnect the actuator rod and key lock cylinder, and finally remove the actuator, with installation reversing the removal steps.