What is the location and installation process for the CKP sensor in Kia Optima?

2001 through 2006 four-cylinder models,The CKP sensor is located on the right (passenger's) end of the engine, behind the timing belt cover; next to the crankshaft sprocket. Disconnect the cable from the negative battery terminal. Remove the lower liming belt cover. Disconnect the sensor wiring harness. Remove the two mounting bolts and lift the sensor off. Installation is the reverse of removal. 2006.5 four-cylinder models and all V6 models: The CKP sensor on four-cylinder engines is located at the front of the engine block, below the left end of the cylinder head. On V6 engines it's located on the front of the engine block, below the left end of the exhaust manifold. Remove any components that are in the way. Using a mirror and a flashlight locate the CKP sensor. Trace the CKP sensor wiring harness to its electrical connector and disconnect the connector. Remove the CKP sensor mounting bolt and remove the CKP sensor. Installation is the reverse of removal. If you're going to install the same sensor, make sure the0-ring is in good condition.

Genuine Kia Optima Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Crankshaft Position Sensors found

View related parts
Kia Optima Crankshaft Position Sensor
Part Number: 3918025300
$130.17 MSRP: $186.22
You Save: $56.05 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-Crankshaft Position; Crankshaft Sensor
- Replaces: 3918025200
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2015 Kia Optima | High Grade, Middle Grade | 2.0L - Theta 2, 2.4L, 2.4L - Theta 2, 2.4L - Theta FF | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Kia Optima Crankshaft Position Sensor
Part Number: 391802G000
$79.57 MSRP: $112.87
You Save: $33.30 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-Crankshaft Position; Crankshaft Sensor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2020 Kia Optima | 2.0L - Theta 2, 2.4L - Theta 2 | Sedan - 4Door 5P
View related parts
Kia Optima Crankshaft Position Sensor
Part Number: 391802B030
$67.21 MSRP: $95.33
You Save: $28.12 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-Crankshaft Position; Crankshaft Sensor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2020 Kia Optima | 1.6L - GAMMA | Sedan - 4Door 5P
View related parts
Kia Optima Crankshaft Position Sensor
Part Number: 3918025200
$134.08 MSRP: $186.22
You Save: $52.14 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-Crankshaft Position
- Replaced by: 3918025300
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2008 Kia Optima | High Grade, Middle Grade | 2.4L, 2.4L - Theta FF | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Kia Optima Wheel Crankshaft Position Sensor
Part Number: 391902G000
$38.04 MSRP: $51.97
You Save: $13.93 (27%)
ADD TO CART
Product Specifications
- Other Name: Wheel-Crank Shaft Position Sensor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2008-2015 Kia Optima | 2.0L - Theta 2, 2.4L - Theta 2 | Sedan - 4Door 5P
View related parts
Kia Optima Wheel Crankshaft Position Sensor
Part Number: 231412B700
$30.42 MSRP: $41.22
You Save: $10.80 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel-Crank Shaft Position Sensor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2020 Kia Optima | 1.6L - GAMMA | Sedan - 4Door 5P
View related parts
Kia Optima Wheel-Crkshf Position Sensor
Part Number: 391903E001
$31.94 MSRP: $45.30
You Save: $13.36 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel-Crank Shaft Position Sensor; Sensor Ring
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2010 Kia Optima | High Grade, Middle Grade | 2.7L, 2.7L - MU | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Kia Optima Crankshaft Position Sensor
Part Number: 391803E100
$88.91 MSRP: $126.12
You Save: $37.21 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-Crankshaft Position; Crankshaft Sensor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2010 Kia Optima | High Grade, Middle Grade | 2.7L, 2.7L - MU | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Kia Optima Wheel Crankshaft Position Sensor
Part Number: 3919025000
$39.86 MSRP: $54.45
You Save: $14.59 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel-Crank Shaft Position Sensor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2010 Kia Optima | High Grade, Middle Grade | 2.4L, 2.4L - Theta 2, 2.4L - Theta FF | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Kia Optima Wheel Crankshaft Position Sensor
Part Number: 3919037104
$27.64 MSRP: $37.45
You Save: $9.81 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Wheel-Crank Shaft Position Sensor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2005 Kia Optima | High Grade, Middle Grade | 2.5L, 2.7L | 4 Door Sedan
View related parts
Kia Optima Crankshaft Position Sensor
Part Number: 3918037150
$87.60 MSRP: $124.25
You Save: $36.65 (30%)
Product Specifications
- Other Name: Sensor-Crankshaft Position; Crankshaft Sensor
- Manufacturer Note: SIEMENS
- Replaces: 3918037200
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2005 Kia Optima | High Grade, Middle Grade | 2.5L, 2.7L | 4 Door Sedan
View related parts
Kia Optima Crank Angle Sensor
Part Number: 3931038060
Product Specifications
- Other Name: Sensor-Crankshaft Angle; Crankshaft Position Sensor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2005 Kia Optima | High Grade, Middle Grade | 2.4L | 4 Door Sedan

Kia Optima Crankshaft Position Sensor

Crankshaft Position Sensor is a common automobile constituent in Kia Optima vehicles; it is used to observe the phase of an engine and transmit impulses to the engine management system. This sensor is very essential when it comes to regulating fuel injection, ignition time, and many other features of the engine. These include inductive, Hall Effect, magnetoresistive, as well as optical sensors, and all of these are applied in Ki Optima motor vehicles with certain differences. The primary of Crankshaft Position Sensor is to send the crankshaft position and speed to the Engine Control Unit for the optimum operation of the engine. Abnormality in this sensor may cause issues in start-up and other engine related complications; therefore, it is deemed important for efficient running of vehicles.

If you're in search of top-notch, reasonably priced OEM Kia Optima Crankshaft Position Sensor, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Optima Crankshaft Position Sensor, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Optima Crankshaft Position Sensor Parts Questions & Experts Answers

Crankshaft Position Sensor
3918025200
Q: What is the location and installation process for the CKP sensor in Kia Optima?
A: 2001 through 2006 four-cylinder models,The CKP sensor is located on the right (passenger's) end of the engine, behind the timing belt cover; next to the crankshaft sprocket. Disconnect the cable from the negative battery terminal. Remove the lower liming belt cover. Disconnect the sensor wiring harness. Remove the two mounting bolts and lift the sensor off. Installation is the reverse of removal. 2006.5 four-cylinder models and all V6 models: The CKP sensor on four-cylinder engines is located at the front of the engine block, below the left end of the cylinder head. On V6 engines it's located on the front of the engine block, below the left end of the exhaust manifold. Remove any components that are in the way. Using a mirror and a flashlight locate the CKP sensor. Trace the CKP sensor wiring harness to its electrical connector and disconnect the connector. Remove the CKP sensor mounting bolt and remove the CKP sensor. Installation is the reverse of removal. If you're going to install the same sensor, make sure the0-ring is in good condition.