Where is the CMP sensor located and how do you remove and install it on Kia Optima?

The CMP sensor is located on the driver's end of the cylinder head. First, disconnect the cable from the negative battery terminal. Then, remove the air intake duct, if necessary, to provide more room to work. Next, disconnect the electrical connector from the CMP sensor. After that, remove the CMP sensor mounting bolt(s) and remove the sensor. If you're going to install the same sensor, check the condition of the 0-ring. Replace the 0-ring if it's damaged. Finally, installation is the reverse of removal.

Genuine Kia Optima Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Camshaft Position Sensors found

View related parts
Kia Optima CAMSHAFT Position Sensor
Part Number: 393502B030
$97.29 MSRP: $138.00
You Save: $40.71 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-CAMSHAFT Position; Camshaft Sensor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2020 Kia Optima | 1.6L - GAMMA | Sedan - 4Door 5P
View related parts
Kia Optima CAMSHAFT Position Sensor
Part Number: 3935025010
$64.90 MSRP: $92.05
You Save: $27.15 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-CAMSHAFT Position; Camshaft Sensor
- Replaces: 3935025000
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2015 Kia Optima | High Grade, Middle Grade | 2.0L - Theta 2, 2.4L, 2.4L - Theta 2, 2.4L - Theta FF | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Kia Optima CAMSHAFT Position Sensor
Part Number: 393502G000
$66.39 MSRP: $94.17
You Save: $27.78 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-CAMSHAFT Position; Camshaft Sensor
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2016-2020 Kia Optima | 2.0L - Theta 2, 2.4L - Theta 2 | Sedan - 4Door 5P
View related parts
Kia Optima CAMSHAFT Position Sensor
Part Number: 3935037110
$83.73 MSRP: $118.77
You Save: $35.04 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-Top Dead Center(Hall)
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2005 Kia Optima | High Grade, Middle Grade | 2.5L, 2.7L | 4 Door Sedan
View related parts
Kia Optima CAMSHAFT Position Sensor
Part Number: 3931038050
$112.38 MSRP: $159.40
You Save: $47.02 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-CAMSHAFT Position
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2000-2005 Kia Optima | High Grade, Middle Grade | 2.4L | 4 Door Sedan
View related parts
Kia Optima Camshaft Position Sensor, Right
Part Number: 393503E110
$102.44 MSRP: $145.30
You Save: $42.86 (30%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-Camshaft Position,Rh; Camshaft Position Sensor, Camshaft Sensor
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2010 Kia Optima | High Grade, Middle Grade | 2.7L, 2.7L - MU | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Kia Optima CAMSHAFT Position Sensor
Part Number: 3935025000
$67.38 MSRP: $92.05
You Save: $24.67 (27%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor-CAMSHAFT Position
- Replaced by: 3935025010
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2008 Kia Optima | High Grade, Middle Grade | 2.4L, 2.4L - Theta FF | 4 Door Sedan, Sedan - 4Door 5P
View related parts
Kia Optima Camshaft Position Sensor, Left
Part Number: 393503E120
$115.74 MSRP: $164.17
You Save: $48.43 (30%)
Product Specifications
- Other Name: Sensor-Camshaft Position,Lh; Camshaft Position Sensor, Camshaft Sensor
- Position: Driver Side
- Replaces: 393503E220
- Warranty: This genuine part is guaranteed by Kia's factory warranty.
Fits the following Vehicles:
- 2006-2010 Kia Optima | High Grade, Middle Grade | 2.7L, 2.7L - MU | 4 Door Sedan, Sedan - 4Door 5P

Kia Optima Camshaft Position Sensor

Camshaft Position Sensor found in Kia Optima vehicles is one of the significant parts of vehicles, which is responsible for monitoring the camshaft position and speed and then passing this information to the engine control module, to control fuel injectors and ignition timing. Usually it is installed above the camshaft but depending on the model of the vehicle the location differ. Combined with the crank sensor, the Camshaft Position Sensor is used to timing various engine parts to make efficiency and, more critically, the fuel injection timing as well as the measurement of engine speed. As proven by an example of a faulty Camshaft Position Sensor, these consequences underline the need for the corresponding procedures and checks.

If you're in search of top-notch, reasonably priced OEM Kia Optima Camshaft Position Sensor, then you've found the perfect spot. Our website boasts an extensive inventory of Kia Optima Camshaft Position Sensor, all priced at the market's premier price. Rest assured, every genuine part we offer comes with a warranty straight from the manufacturer.

Kia Optima Camshaft Position Sensor Parts Questions & Experts Answers

CAMSHAFT Position Sensor
3935025010
Q: Where is the CMP sensor located and how do you remove and install it on Kia Optima?
A: The CMP sensor is located on the driver's end of the cylinder head. First, disconnect the cable from the negative battery terminal. Then, remove the air intake duct, if necessary, to provide more room to work. Next, disconnect the electrical connector from the CMP sensor. After that, remove the CMP sensor mounting bolt(s) and remove the sensor. If you're going to install the same sensor, check the condition of the 0-ring. Replace the 0-ring if it's damaged. Finally, installation is the reverse of removal.